|
THUMBNAILS |
DESCRIPTIONS |
 |
DEBURRING, AUTOMOTIVE Reason: Stamping of Transmission splines leaves fine burrs which are removed in seconds with no media imbedded in the surface. At the same time, wet blasting prepares the inside for a pressed bearing. |
|
 |
DEBURRING, AUTOMOTIVE Deep, sharp stress risers left by broaching are removed with fine slurry blasting. The result is a very large increase in life cycle from the effects of fatigue. |
|
 |
DEBURRING, PRECISION MACHINING Wet Blasting removes fine burrs in machined titanium with no dimensional damage while leaving a clean, matt finish. |
|
 |
DEBURRING AND COSMETIC FINISHING Examples of deburring machined aluminum components - computer heat sinks, engine fuel rails, etc. |
|
 |
High Pressure Heated Water Cleaning and/or Deburring |
|
 |
CRACK DETECTION, AVIATION Reason: cracks are exposed with no media imbedded in the surface leaving an even finish ready for liquid penetrate inspection or LPI. |
|
 |
AIRCRAFT WHEEL OVERHAUL Reason: Oxidation and corrosion deep cleaned for inspection and repair, faults exposed. |
|
 |
AUTOMOTIVE REBUILDING TORQUE CONVERTERS Reason: Wet Blasting yields simultaneous internal cleaning of light oils and corrosion and is dust free. |
|
 |
AUTOMOTIVE REBUILDING TRANSMISSIONS Reason: Wet abrasive slurry blasting offers deep cleaning of aluminum cases and can eliminate painting while leaving a superior cosmetic finish. |
|
 |
DIESEL ENGINE REBUILDING Reason: Wet Blasting combines several steps to yield clean parts. |
|
 |
CIRCUIT BOARD CLEANING Reason: Plastic slurry blasting cleans with out heat or static. |
|
 |
INVESTMENT CASTING REMOVAL Reason: Vapor blasting cleans Tight corners, leaving and even finish with no media imbedded. |
|
 |
SEMICONDUCTOR TOOLING COATING REMOVAL Reason: Chemicals eliminated, process time lowered. Delicate cleaning with fine slurry can remove layers with out media imbedded. Parts include metallic implant and ceramic tooling. |
|
 |
PLASTIC DEFLASHING Reason: Using plastic in the wet blasting slurry removes flash with no damage or static. Parts are deflashed, rinsed, and dried in one system to meet dust free “milipore” cleanliness standards. |
|
 |
MARINE ENGINE OVERHAUL Reason: Parts washing and deep slurry cleaning in one wet blasting process. |
|
 |
MOLD CLEANING Reason: Slurry Blasting achieves simultaneous cleaning and polishing with no damage. |
|
 |
AVIATION TURBINE WET PEENING Turbine Blades, vanes, etc., are wet peened on the “N scale” using glass bead or Zirpro Ceramic media. |
|
 |
Cosmetic Finishing Golf Heads Reason: Wet Blasting can achieve various looks while leaving a clean scuff resistant surface. |
|
 |
COSMETIC BLENDING Machined Aluminum is wet slurry blasted to achieve an even clean dust free finish. |
|
 |
Composite Bonding Preparation Reason: Wet Blasting etches the surface to create a light anchoring pattern with no media imbedded to increase the bonding strength.
|
|
|
DESCALING Wet Blasting with various abrasive slurry from fine to coarse deep cleans scale for cosmetics and painting prep while eliminating caustic chemicals. |
