Wet Technologies Vapor Blasting System Testimonials

  • "After purchasing our Wet Technologies automatic wet blasting machine we saw our burr hand production increase by 300%. Mitch Sherman has gone out of his way to diagnose issues and to make sure the machine is running up to our standards. We had burr issues with our end customer before the installation of our machine and they have since gone away.”

    Amphenol Corporation | Sidney, New York

  • "This is the best process for etching our composites and Wet Tech is the best vendor we’ve found."

    Boeing | Arlington VA| Found (4) Inline Systems, Two (2) Robotic Systems

  • “I wanted to give you a status update. We have been performing tests with our existing Wet Technologies cabinet on many different engine part types including pistons, valves, e-mods, heads, casings, etc. Everyone connected including the maintenance people are pleased with the system and how easy it is to operate and maintain. Also, in the factory support we have received. In addition, the rental system was run extensively both here and in Mexico. We believe that this process has a future here. I understand that the system you delivered to the Franklin plant is also running well for production and testing. As you suggested, the closed loop green technology angle has gotten more people interested. Please keep me up to date with your progress on the new batch system, which we are also hoping to bring in."

    Caterpillar

  • “All specifications and requirements, including requested customizations, have been met. The unit is solid and well built. Training was professional and thorough.”

    Keysight Technologies Inc. | Santa Rosa, CA

  • “We’ve been using Wet Technologies to fabricate our custom wet-slurry blast machines since the company’s inception. We use these machines to clean our aircraft engine vanes after our laser hole drill process. We’re ecstatic about our new machines which have surpassed expectations and I’m sure will prove to be as reliable as the other six we’ve purchased.”

    GE Aircraft Engines | Madisonville, KY

  • "It has been an absolute pleasure working with the Wet Technologies team! We were transitioning from a dry blast cabinet to a wet-blast and had so many questions. Wet Technologies were more than accommodating in helping us find the right cabinet for us. They were available whenever we had questions and allowed us to test the machine to ensure it was the right fit for our business! Thanks guys!!"

    HeadGames Motorworks | Princeton Junction, NJ 08550

  • "We purchased a WT50 high volume liquid media system… to replace a competitive model. Both systems featured submerged pumps and closed-loop filtration. Our operators and maintenance staff are very pleased with the efficiency and ergonomic improvements, and marveled over the minimum downtime required for PM, a fraction of what it used to be"

    Honeywell | Allentown, PA

  • "We are enjoying working with the machine to descale and polish platinum tooling. Wonderful customer service."

    Johns Manville | Tucson, AZ

  • "We have been operating the Wet Technologies system on a daily basis following the introduction of your process over a year ago. The equipment has met all expectations and we have been pleased with the factory support. The equipment has contributed to our remanufacturing operations by improving efficiency, while being a desirable green process"

    Mazda Remanufacturing | Colonial Heights, VA 23834

  • "Wet Tech handled all the challenges that we presented with their custom piece of equipment.We appreciate the collaboration and support beyond expectations. Looking forward to continued business together.”

    Medtronic | Warsaw, IN 46582

  • "The initial inspection and training by Brian, Dan and Fred was outstanding.Their dedication goes way beyond what was expected!”

     Navair | China Lake, CA

  • "The overall experience is outstanding, and our Wettech equipment is going to make our job a lot easier"

    Northrop Grumman | Sunnyvale, CA

  • "This is the go-to system in our shop. It’s basically replaced the dry blast and all hand cleaning of our boat mechanical systems and engine parts. Great company."

    NYPD Marine | WT50

  • Extremely satisfied with the attention to details in training, hospitality and the quality of the machine.”

    Sturm Ruger & Company | Prescott, AZ

  • "Wet Tech systems have found a permanent home in our deburring and finishing production."

    Newington, NH

  • "All of our requests have been accomplished. Working with Brian and his team is a pleasure. We look forward to future projects with Wet Tech.”

    Smith & Wesson | Springfield, MA

  • "Excellent workmanship. Smooth operation of the automated process. Personnel are professional in all aspects of the business. "

    Washington, DC | Six (6) Total Systems, Four (4) Robotic Systems

Long-term customer satisfaction

“It can take a part that’s 40-50 years old and make it look brand new.”

— Haydon Brothers Automotive | Anaheim, CA | Manual WT50SS Installed 2015, still in use today

Custom Industries & Applications

Aerospace & Aviation MRO

Automotive REMAN & Restoration

Coins &
Precious Metals

Firearms

Marine

Medical

Military MX & Defense